Sie sind hier: Aktuelles> Produktneuheiten> DOWSIL TC-3065 Thermal Gel | New
RELYON PLASMA: Lifetime of the Standard Modul
Plasma expert Dr. Dariusz Korzec and his team have extensively tested the lifetime of the Module Standard. This module can be used for the entire piezobrush® product range from relyon plasma, including the piezobrush® PZ3 handheld device and the compact plasma integration piezobrush® PZ3-i for production lines.Summary of the endurance testThe subject of the study is the investigation of the long-term durability of Standard Modules. For the endurance test, ...
Black&Light: Black epoxies cure under UV irradiation
With the new "Black & Light" adhesives, Panacol has developed a new adhesive technology: deep curing black epoxies. Black epoxy adhesives from Panacol's Vitralit product range can now be cured with UV light sources in thicker layers, without resorting to secondary curing mechanisms.Conventional black UV adhesives have a major disadvantage: the black color absorbs a high proportion of the UV intensity, which means that the energy needed to fully polymerize an adhesive can only penetrate a ...
NO ODOUR adhesive for low surface energy plastics inluding polyolefins!
PERMABOND has launched its new Permabond TA4630 and TA4631, no odor polyolefin adhesives for low surface energy plastics, especially developed for difficult to bond plastics such as polypropylene, polyethylene and PTFE, without surface pre-treatment. They can even bond acetal (POM)!Key features of these adhesives include:No odour = No residual smell on bonded componentsSuitable for bonding dissimilar materials including metals, composites and even ...
Hydrogen-redy pipe sealant from PERMABOND
Permabond's F201HV toughened anaerobic sealant is now "Hydrogen Ready" and meet's Kiwa's strict Inorm KE214 hydrogen standard.Hydrogen gas is an extremely explosive, high energy, searching gas. It is vital that pipework connections are sealed with approved materials such as F201HV.Permabond F201HV anaerobic sealant is a high-strength, high-performance engineering adhesive designed for sealing metal pipe joints. This special product contains a high-tech rubber core-shell ...
The solution to nylon-bonding nightmares!
Permabond has launched its newly developed structural acrylic adhesive. TA4660 or also referd to as Nylon Bonder is a two-part structural adhesive designed for use on difficult filled and unfilled nylon surfaces, with no requirement to carry out surface pre-treatment or priming before bonding. The adhesive cures fully at room temperature to form a high strength joint. During pull tests, it even caused the nylon to break, not the bond!TA4660 is ideal for bonding Aluminium, Glass filled ...
New UV anaerobic adhesive from PANACOL
Panacol has developed Vitralit® UD 4292 F, a new dual-curing adhesive that cures primarily by UV light with a secondary anerobic cure for shadowed areas. The special feature of this adhesive system is the high glass transition range of >130°C when cured under optimum conditions.In response to a growing market demand for UV anerobic adhesive systems, Panacol has expanded its portfolio of dual-curing adhesive systems with Vitralit® UD 4292 F. This new product is ideally suited ...
PERMABOND 825 | New
PERMABOND 825 is a low viscosity modified ethyl cyanoacrylate suitable for applications where high temperature resistance is required. This material is fast setting and has good adhesion to rubber, metal and plastics. Permabond® 825 has excellent retention of strength during thermal ageing and it is resistant to temperatures of up to 200°C, without the need for a secondary heat cure. This makes it an ideal choice for high speed production lines, bonding components that need to ...
Smart system solution for needle bonding
A main field of application for adhesives in medical systems is needle bonding and syringe assembly – the bonding of stainless steel needles or cannulas into glass or plastic syringes. These needles are produced in large quantities which requires rapid and reliable bonding in high volume production. In addition to their mechanical bond strength, the adhesives used must allow high-precision production and permanent joining and must withstand various sterilization ...
DOWSIL CC-8030 UV and Moisture Dual Cure Conformal Coating | New
DOWSIL CC-8030 is a one-part, translucent, Medium Viscosity, UV and Moisture Dual Curable Coating. Features & BenefitsNo added solvents BTX solventless Low viscosity, sprayable Fast primary UV cure Secondary moisture cure for shadowed areas Non-oxygen inhibited formulation Elastomeric formulation improves reliability against stress Low modulus for delicate components UV indicator allows for easy or automated inspection UL 746E UL-94 ...
DOWSIL TC-3065 Thermal Gel | New
DOWSIL TC-3065 is a one-part, 6.5W/mk thermal conductivity silicone gel. It’s printable or dispensable to cure as a soft thermal gel to replace fabricated thermal pads for thermal transferring, stress relieving and shock damping. Room temperature curing, or accelerated curing at 60°C or higher temperature for shorter curing time.Features & BenefitsOne-part, gray, dispensable and curable thermal gel Re-workable after curing Room temperature curing or accelerated at 60°C or ...